File: //proc/thread-self/root/usr/lib/ruby/gems/3.2.0/gems/rbs-2.8.2/core/ractor.rbs
# <!-- rdoc-file=ractor.rb -->
# Ractor is a Actor-model abstraction for Ruby that provides thread-safe
# parallel execution.
#
# Ractor.new can make a new Ractor, and it will run in parallel.
#
# # The simplest ractor
# r = Ractor.new {puts "I am in Ractor!"}
# r.take # wait for it to finish
# # here "I am in Ractor!" would be printed
#
# Ractors do not share usual objects, so the same kinds of thread-safety
# concerns such as data-race, race-conditions are not available on multi-ractor
# programming.
#
# To achieve this, ractors severely limit object sharing between different
# ractors. For example, unlike threads, ractors can't access each other's
# objects, nor any objects through variables of the outer scope.
#
# a = 1
# r = Ractor.new {puts "I am in Ractor! a=#{a}"}
# # fails immediately with
# # ArgumentError (can not isolate a Proc because it accesses outer variables (a).)
#
# On CRuby (the default implementation), Global Virtual Machine Lock (GVL) is
# held per ractor, so ractors are performed in parallel without locking each
# other.
#
# Instead of accessing the shared state, the objects should be passed to and
# from ractors via sending and receiving objects as messages.
#
# a = 1
# r = Ractor.new do
# a_in_ractor = receive # receive blocks till somebody will pass message
# puts "I am in Ractor! a=#{a_in_ractor}"
# end
# r.send(a) # pass it
# r.take
# # here "I am in Ractor! a=1" would be printed
#
# There are two pairs of methods for sending/receiving messages:
#
# * Ractor#send and Ractor.receive for when the *sender* knows the receiver
# (push);
# * Ractor.yield and Ractor#take for when the *receiver* knows the sender
# (pull);
#
#
# In addition to that, an argument to Ractor.new would be passed to block and
# available there as if received by Ractor.receive, and the last block value
# would be sent outside of the ractor as if sent by Ractor.yield.
#
# A little demonstration on a classic ping-pong:
#
# server = Ractor.new do
# puts "Server starts: #{self.inspect}"
# puts "Server sends: ping"
# Ractor.yield 'ping' # The server doesn't know the receiver and sends to whoever interested
# received = Ractor.receive # The server doesn't know the sender and receives from whoever sent
# puts "Server received: #{received}"
# end
#
# client = Ractor.new(server) do |srv| # The server is sent inside client, and available as srv
# puts "Client starts: #{self.inspect}"
# received = srv.take # The Client takes a message specifically from the server
# puts "Client received from " \
# "#{srv.inspect}: #{received}"
# puts "Client sends to " \
# "#{srv.inspect}: pong"
# srv.send 'pong' # The client sends a message specifically to the server
# end
#
# [client, server].each(&:take) # Wait till they both finish
#
# This will output:
#
# Server starts: #<Ractor:#2 test.rb:1 running>
# Server sends: ping
# Client starts: #<Ractor:#3 test.rb:8 running>
# Client received from #<Ractor:#2 rac.rb:1 blocking>: ping
# Client sends to #<Ractor:#2 rac.rb:1 blocking>: pong
# Server received: pong
#
# It is said that Ractor receives messages via the *incoming port*, and sends
# them to the *outgoing port*. Either one can be disabled with
# Ractor#close_incoming and Ractor#close_outgoing respectively. If a ractor
# terminated, its ports will be closed automatically.
#
# ## Shareable and unshareable objects
#
# When the object is sent to and from the ractor, it is important to understand
# whether the object is shareable or unshareable. Most of objects are
# unshareable objects.
#
# Shareable objects are basically those which can be used by several threads
# without compromising thread-safety; e.g. immutable ones. Ractor.shareable?
# allows to check this, and Ractor.make_shareable tries to make object shareable
# if it is not.
#
# Ractor.shareable?(1) #=> true -- numbers and other immutable basic values are
# Ractor.shareable?('foo') #=> false, unless the string is frozen due to # freeze_string_literals: true
# Ractor.shareable?('foo'.freeze) #=> true
#
# ary = ['hello', 'world']
# ary.frozen? #=> false
# ary[0].frozen? #=> false
# Ractor.make_shareable(ary)
# ary.frozen? #=> true
# ary[0].frozen? #=> true
# ary[1].frozen? #=> true
#
# When a shareable object is sent (via #send or Ractor.yield), no additional
# processing happens, and it just becomes usable by both ractors. When an
# unshareable object is sent, it can be either *copied* or *moved*. The first is
# the default, and it makes the object's full copy by deep cloning of
# non-shareable parts of its structure.
#
# data = ['foo', 'bar'.freeze]
# r = Ractor.new do
# data2 = Ractor.receive
# puts "In ractor: #{data2.object_id}, #{data2[0].object_id}, #{data2[1].object_id}"
# end
# r.send(data)
# r.take
# puts "Outside : #{data.object_id}, #{data[0].object_id}, #{data[1].object_id}"
#
# This will output:
#
# In ractor: 340, 360, 320
# Outside : 380, 400, 320
#
# (Note that object id of both array and non-frozen string inside array have
# changed inside the ractor, showing it is different objects. But the second
# array's element, which is a shareable frozen string, has the same object_id.)
#
# Deep cloning of the objects may be slow, and sometimes impossible.
# Alternatively, `move: true` may be used on sending. This will *move* the
# object to the receiving ractor, making it inaccessible for a sending ractor.
#
# data = ['foo', 'bar']
# r = Ractor.new do
# data_in_ractor = Ractor.receive
# puts "In ractor: #{data_in_ractor.object_id}, #{data_in_ractor[0].object_id}"
# end
# r.send(data, move: true)
# r.take
# puts "Outside: moved? #{Ractor::MovedObject === data}"
# puts "Outside: #{data.inspect}"
#
# This will output:
#
# In ractor: 100, 120
# Outside: moved? true
# test.rb:9:in `method_missing': can not send any methods to a moved object (Ractor::MovedError)
#
# Notice that even `inspect` (and more basic methods like `__id__`) is
# inaccessible on a moved object.
#
# Besides frozen objects, there are shareable objects. Class and Module objects
# are shareable so the Class/Module definitions are shared between ractors.
# Ractor objects are also shareable objects. All operations for the shareable
# mutable objects are thread-safe, so the thread-safety property will be kept.
# We can not define mutable shareable objects in Ruby, but C extensions can
# introduce them.
#
# It is prohibited to access instance variables of mutable shareable objects
# (especially Modules and classes) from ractors other than main:
#
# class C
# class << self
# attr_accessor :tricky
# end
# end
#
# C.tricky = 'test'
#
# r = Ractor.new(C) do |cls|
# puts "I see #{cls}"
# puts "I can't see #{cls.tricky}"
# end
# r.take
# # I see C
# # can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
#
# Ractors can access constants if they are shareable. The main Ractor is the
# only one that can access non-shareable constants.
#
# GOOD = 'good'.freeze
# BAD = 'bad'
#
# r = Ractor.new do
# puts "GOOD=#{GOOD}"
# puts "BAD=#{BAD}"
# end
# r.take
# # GOOD=good
# # can not access non-shareable objects in constant Object::BAD by non-main Ractor. (NameError)
#
# # Consider the same C class from above
#
# r = Ractor.new do
# puts "I see #{C}"
# puts "I can't see #{C.tricky}"
# end
# r.take
# # I see C
# # can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
#
# See also the description of `# shareable_constant_value` pragma in [Comments
# syntax](rdoc-ref:syntax/comments.rdoc) explanation.
#
# ## Ractors vs threads
#
# Each ractor creates its own thread. New threads can be created from inside
# ractor (and, on CRuby, sharing GVL with other threads of this ractor).
#
# r = Ractor.new do
# a = 1
# Thread.new {puts "Thread in ractor: a=#{a}"}.join
# end
# r.take
# # Here "Thread in ractor: a=1" will be printed
#
# ## Note on code examples
#
# In examples below, sometimes we use the following method to wait till ractors
# that are not currently blocked will finish (or process till next blocking)
# method.
#
# def wait
# sleep(0.1)
# end
#
# It is **only for demonstration purposes** and shouldn't be used in a real
# code. Most of the times, just #take is used to wait till ractor will finish.
#
# ## Reference
#
# See [Ractor design doc](rdoc-ref:ractor.md) for more details.
#
class Ractor
# <!--
# rdoc-file=ractor.rb
# - count()
# -->
# Returns total count of Ractors currently running.
#
# Ractor.count #=> 1
# r = Ractor.new(name: 'example') { Ractor.yield(1) }
# Ractor.count #=> 2 (main + example ractor)
# r.take # wait for Ractor.yield(1)
# r.take # wait till r will finish
# Ractor.count #=> 1
#
def self.count: () -> Integer
# <!--
# rdoc-file=ractor.rb
# - current()
# -->
# Returns the currently executing Ractor.
#
# Ractor.current #=> #<Ractor:#1 running>
#
def self.current: () -> untyped
# <!--
# rdoc-file=ractor.rb
# - main()
# -->
# returns main ractor
#
def self.main: () -> untyped
# <!--
# rdoc-file=ractor.rb
# - Ractor.make_shareable(obj, copy: false) -> shareable_obj
# -->
# Make `obj` shareable between ractors.
#
# `obj` and all the objects it refers to will be frozen, unless they are already
# shareable.
#
# If `copy` keyword is `true`, the method will copy objects before freezing them
# This is safer option but it can take be slower.
#
# Note that the specification and implementation of this method are not mature
# and may be changed in the future.
#
# obj = ['test']
# Ractor.shareable?(obj) #=> false
# Ractor.make_shareable(obj) #=> ["test"]
# Ractor.shareable?(obj) #=> true
# obj.frozen? #=> true
# obj[0].frozen? #=> true
#
# # Copy vs non-copy versions:
# obj1 = ['test']
# obj1s = Ractor.make_shareable(obj1)
# obj1.frozen? #=> true
# obj1s.object_id == obj1.object_id #=> true
# obj2 = ['test']
# obj2s = Ractor.make_shareable(obj2, copy: true)
# obj2.frozen? #=> false
# obj2s.frozen? #=> true
# obj2s.object_id == obj2.object_id #=> false
# obj2s[0].object_id == obj2[0].object_id #=> false
#
# See also the "Shareable and unshareable objects" section in the Ractor class
# docs.
#
def self.make_shareable: [T] (T obj, ?copy: boolish) -> T
# <!--
# rdoc-file=ractor.rb
# - Ractor.new(*args, name: nil) {|*args| block } -> ractor
# -->
# Create a new Ractor with args and a block.
#
# A block (Proc) will be isolated (can't access to outer variables). `self`
# inside the block will refer to the current Ractor.
#
# r = Ractor.new { puts "Hi, I am #{self.inspect}" }
# r.take
# # Prints "Hi, I am #<Ractor:#2 test.rb:1 running>"
#
# `args` passed to the method would be propagated to block args by the same
# rules as objects passed through #send/Ractor.receive: if `args` are not
# shareable, they will be copied (via deep cloning, which might be inefficient).
#
# arg = [1, 2, 3]
# puts "Passing: #{arg} (##{arg.object_id})"
# r = Ractor.new(arg) {|received_arg|
# puts "Received: #{received_arg} (##{received_arg.object_id})"
# }
# r.take
# # Prints:
# # Passing: [1, 2, 3] (#280)
# # Received: [1, 2, 3] (#300)
#
# Ractor's `name` can be set for debugging purposes:
#
# r = Ractor.new(name: 'my ractor') {}
# p r
# #=> #<Ractor:#3 my ractor test.rb:1 terminated>
#
def self.new: (*untyped args, ?name: string) { (*untyped) -> untyped } -> Ractor
# <!--
# rdoc-file=ractor.rb
# - Ractor.receive -> msg
# -->
# Receive an incoming message from the current Ractor's incoming port's queue,
# which was sent there by #send.
#
# r = Ractor.new do
# v1 = Ractor.receive
# puts "Received: #{v1}"
# end
# r.send('message1')
# r.take
# # Here will be printed: "Received: message1"
#
# Alternatively, private instance method `receive` may be used:
#
# r = Ractor.new do
# v1 = receive
# puts "Received: #{v1}"
# end
# r.send('message1')
# r.take
# # Here will be printed: "Received: message1"
#
# The method blocks if the queue is empty.
#
# r = Ractor.new do
# puts "Before first receive"
# v1 = Ractor.receive
# puts "Received: #{v1}"
# v2 = Ractor.receive
# puts "Received: #{v2}"
# end
# wait
# puts "Still not received"
# r.send('message1')
# wait
# puts "Still received only one"
# r.send('message2')
# r.take
#
# Output:
#
# Before first receive
# Still not received
# Received: message1
# Still received only one
# Received: message2
#
# If close_incoming was called on the ractor, the method raises
# Ractor::ClosedError if there are no more messages in incoming queue:
#
# Ractor.new do
# close_incoming
# receive
# end
# wait
# # in `receive': The incoming port is already closed => #<Ractor:#2 test.rb:1 running> (Ractor::ClosedError)
#
def self.receive: () -> untyped
# <!--
# rdoc-file=ractor.rb
# - Ractor.receive_if {|msg| block } -> msg
# -->
# Receive only a specific message.
#
# Instead of Ractor.receive, Ractor.receive_if can provide a pattern by a block
# and you can choose the receiving message.
#
# r = Ractor.new do
# p Ractor.receive_if{|msg| msg.match?(/foo/)} #=> "foo3"
# p Ractor.receive_if{|msg| msg.match?(/bar/)} #=> "bar1"
# p Ractor.receive_if{|msg| msg.match?(/baz/)} #=> "baz2"
# end
# r << "bar1"
# r << "baz2"
# r << "foo3"
# r.take
#
# This will output:
#
# foo3
# bar1
# baz2
#
# If the block returns a truthy value, the message will be removed from the
# incoming queue and returned. Otherwise, the message remains in the incoming
# queue and the following received messages are checked by the given block.
#
# If there are no messages left in the incoming queue, the method will block
# until new messages arrive.
#
# If the block is escaped by break/return/exception/throw, the message is
# removed from the incoming queue as if a truthy value had been returned.
#
# r = Ractor.new do
# val = Ractor.receive_if{|msg| msg.is_a?(Array)}
# puts "Received successfully: #{val}"
# end
#
# r.send(1)
# r.send('test')
# wait
# puts "2 non-matching sent, nothing received"
# r.send([1, 2, 3])
# wait
#
# Prints:
#
# 2 non-matching sent, nothing received
# Received successfully: [1, 2, 3]
#
# Note that you can not call receive/receive_if in the given block recursively.
# It means that you should not do any tasks in the block.
#
# Ractor.current << true
# Ractor.receive_if{|msg| Ractor.receive}
# #=> `receive': can not call receive/receive_if recursively (Ractor::Error)
#
def self.receive_if: () { (untyped) -> boolish } -> untyped
# <!--
# rdoc-file=ractor.rb
# - recv()
# -->
#
alias self.recv self.receive
# <!--
# rdoc-file=ractor.rb
# - Ractor.select(*ractors, [yield_value:, move: false]) -> [ractor or symbol, obj]
# -->
# Waits for the first ractor to have something in its outgoing port, reads from
# this ractor, and returns that ractor and the object received.
#
# r1 = Ractor.new {Ractor.yield 'from 1'}
# r2 = Ractor.new {Ractor.yield 'from 2'}
#
# r, obj = Ractor.select(r1, r2)
#
# puts "received #{obj.inspect} from #{r.inspect}"
# # Prints: received "from 1" from #<Ractor:#2 test.rb:1 running>
#
# If one of the given ractors is the current ractor, and it would be selected,
# `r` will contain `:receive` symbol instead of the ractor object.
#
# r1 = Ractor.new(Ractor.current) do |main|
# main.send 'to main'
# Ractor.yield 'from 1'
# end
# r2 = Ractor.new do
# Ractor.yield 'from 2'
# end
#
# r, obj = Ractor.select(r1, r2, Ractor.current)
# puts "received #{obj.inspect} from #{r.inspect}"
# # Prints: received "to main" from :receive
#
# If `yield_value` is provided, that value may be yielded if another Ractor is
# calling #take. In this case, the pair `[:yield, nil]` would be returned:
#
# r1 = Ractor.new(Ractor.current) do |main|
# puts "Received from main: #{main.take}"
# end
#
# puts "Trying to select"
# r, obj = Ractor.select(r1, Ractor.current, yield_value: 123)
# wait
# puts "Received #{obj.inspect} from #{r.inspect}"
#
# This will print:
#
# Trying to select
# Received from main: 123
# Received nil from :yield
#
# `move` boolean flag defines whether yielded value should be copied (default)
# or moved.
#
def self.select: (*Ractor ractors, ?move: boolish, ?yield_value: untyped) -> [ Ractor | Symbol, untyped ]
# <!--
# rdoc-file=ractor.rb
# - Ractor.shareable?(obj) -> true | false
# -->
# Checks if the object is shareable by ractors.
#
# Ractor.shareable?(1) #=> true -- numbers and other immutable basic values are frozen
# Ractor.shareable?('foo') #=> false, unless the string is frozen due to # freeze_string_literals: true
# Ractor.shareable?('foo'.freeze) #=> true
#
# See also the "Shareable and unshareable objects" section in the Ractor class
# docs.
#
def self.shareable?: (untyped obj) -> bool
# <!--
# rdoc-file=ractor.rb
# - Ractor.yield(msg, move: false) -> nil
# -->
# Send a message to the current ractor's outgoing port to be consumed by #take.
#
# r = Ractor.new {Ractor.yield 'Hello from ractor'}
# puts r.take
# # Prints: "Hello from ractor"
#
# The method is blocking, and will return only when somebody consumes the sent
# message.
#
# r = Ractor.new do
# Ractor.yield 'Hello from ractor'
# puts "Ractor: after yield"
# end
# wait
# puts "Still not taken"
# puts r.take
#
# This will print:
#
# Still not taken
# Hello from ractor
# Ractor: after yield
#
# If the outgoing port was closed with #close_outgoing, the method will raise:
#
# r = Ractor.new do
# close_outgoing
# Ractor.yield 'Hello from ractor'
# end
# wait
# # `yield': The outgoing-port is already closed (Ractor::ClosedError)
#
# The meaning of `move` argument is the same as for #send.
#
def self.yield: (untyped obj, ?move: boolish) -> untyped
public
# <!--
# rdoc-file=ractor.rb
# - <<(obj, move: false)
# -->
#
alias << send
# <!--
# rdoc-file=ractor.rb
# - [](sym)
# -->
# get a value from ractor-local storage
#
def []: (Symbol | String sym) -> untyped
# <!--
# rdoc-file=ractor.rb
# - []=(sym, val)
# -->
# set a value in ractor-local storage
#
def []=: [T] (Symbol | String sym, T val) -> T
# <!--
# rdoc-file=ractor.rb
# - ractor.close_incoming -> true | false
# -->
# Closes the incoming port and returns its previous state. All further attempts
# to Ractor.receive in the ractor, and #send to the ractor will fail with
# Ractor::ClosedError.
#
# r = Ractor.new {sleep(500)}
# r.close_incoming #=> false
# r.close_incoming #=> true
# r.send('test')
# # Ractor::ClosedError (The incoming-port is already closed)
#
def close_incoming: () -> bool
# <!--
# rdoc-file=ractor.rb
# - ractor.close_outgoing -> true | false
# -->
# Closes the outgoing port and returns its previous state. All further attempts
# to Ractor.yield in the ractor, and #take from the ractor will fail with
# Ractor::ClosedError.
#
# r = Ractor.new {sleep(500)}
# r.close_outgoing #=> false
# r.close_outgoing #=> true
# r.take
# # Ractor::ClosedError (The outgoing-port is already closed)
#
def close_outgoing: () -> bool
# <!--
# rdoc-file=ractor.rb
# - inspect()
# -->
#
def inspect: () -> String
# <!--
# rdoc-file=ractor.rb
# - name()
# -->
# The name set in Ractor.new, or `nil`.
#
def name: () -> String?
# <!--
# rdoc-file=ractor.rb
# - ractor.send(msg, move: false) -> self
# -->
# Send a message to a Ractor's incoming queue to be consumed by Ractor.receive.
#
# r = Ractor.new do
# value = Ractor.receive
# puts "Received #{value}"
# end
# r.send 'message'
# # Prints: "Received: message"
#
# The method is non-blocking (will return immediately even if the ractor is not
# ready to receive anything):
#
# r = Ractor.new {sleep(5)}
# r.send('test')
# puts "Sent successfully"
# # Prints: "Sent successfully" immediately
#
# Attempt to send to ractor which already finished its execution will raise
# Ractor::ClosedError.
#
# r = Ractor.new {}
# r.take
# p r
# # "#<Ractor:#6 (irb):23 terminated>"
# r.send('test')
# # Ractor::ClosedError (The incoming-port is already closed)
#
# If close_incoming was called on the ractor, the method also raises
# Ractor::ClosedError.
#
# r = Ractor.new do
# sleep(500)
# receive
# end
# r.close_incoming
# r.send('test')
# # Ractor::ClosedError (The incoming-port is already closed)
# # The error would be raised immediately, not when ractor will try to receive
#
# If the `obj` is unshareable, by default it would be copied into ractor by deep
# cloning. If the `move: true` is passed, object is *moved* into ractor and
# becomes inaccessible to sender.
#
# r = Ractor.new {puts "Received: #{receive}"}
# msg = 'message'
# r.send(msg, move: true)
# r.take
# p msg
#
# This prints:
#
# Received: message
# in `p': undefined method `inspect' for #<Ractor::MovedObject:0x000055c99b9b69b8>
#
# All references to the object and its parts will become invalid in sender.
#
# r = Ractor.new {puts "Received: #{receive}"}
# s = 'message'
# ary = [s]
# copy = ary.dup
# r.send(ary, move: true)
#
# s.inspect
# # Ractor::MovedError (can not send any methods to a moved object)
# ary.class
# # Ractor::MovedError (can not send any methods to a moved object)
# copy.class
# # => Array, it is different object
# copy[0].inspect
# # Ractor::MovedError (can not send any methods to a moved object)
# # ...but its item was still a reference to `s`, which was moved
#
# If the object was shareable, `move: true` has no effect on it:
#
# r = Ractor.new {puts "Received: #{receive}"}
# s = 'message'.freeze
# r.send(s, move: true)
# s.inspect #=> "message", still available
#
def send: (untyped obj, ?move: boolish) -> Ractor
# <!--
# rdoc-file=ractor.rb
# - ractor.take -> msg
# -->
# Take a message from ractor's outgoing port, which was put there by
# Ractor.yield or at ractor's finalization.
#
# r = Ractor.new do
# Ractor.yield 'explicit yield'
# 'last value'
# end
# puts r.take #=> 'explicit yield'
# puts r.take #=> 'last value'
# puts r.take # Ractor::ClosedError (The outgoing-port is already closed)
#
# The fact that the last value is also put to outgoing port means that `take`
# can be used as some analog of Thread#join ("just wait till ractor finishes"),
# but don't forget it will raise if somebody had already consumed everything
# ractor have produced.
#
# If the outgoing port was closed with #close_outgoing, the method will raise
# Ractor::ClosedError.
#
# r = Ractor.new do
# sleep(500)
# Ractor.yield 'Hello from ractor'
# end
# r.close_outgoing
# r.take
# # Ractor::ClosedError (The outgoing-port is already closed)
# # The error would be raised immediately, not when ractor will try to receive
#
# If an uncaught exception is raised in the Ractor, it is propagated on take as
# a Ractor::RemoteError.
#
# r = Ractor.new {raise "Something weird happened"}
#
# begin
# r.take
# rescue => e
# p e # => #<Ractor::RemoteError: thrown by remote Ractor.>
# p e.ractor == r # => true
# p e.cause # => #<RuntimeError: Something weird happened>
# end
#
# Ractor::ClosedError is a descendant of StopIteration, so the closing of the
# ractor will break the loops without propagating the error:
#
# r = Ractor.new do
# 3.times {|i| Ractor.yield "message #{i}"}
# "finishing"
# end
#
# loop {puts "Received: " + r.take}
# puts "Continue successfully"
#
# This will print:
#
# Received: message 0
# Received: message 1
# Received: message 2
# Received: finishing
# Continue successfully
#
def take: () -> untyped
# <!--
# rdoc-file=ractor.rb
# - to_s()
# -->
#
alias to_s inspect
private
# <!--
# rdoc-file=ractor.rb
# - receive()
# -->
# same as Ractor.receive
#
def receive: () -> untyped
# <!--
# rdoc-file=ractor.rb
# - receive_if(&b)
# -->
#
def receive_if: () { (untyped) -> boolish } -> untyped
# <!--
# rdoc-file=ractor.rb
# - recv()
# -->
#
alias recv receive
# <!-- rdoc-file=ractor.c -->
# Raised when an attempt is made to send a message to a closed port, or to
# retrieve a message from a closed and empty port. Ports may be closed
# explicitly with Ractor#close_outgoing/close_incoming and are closed implicitly
# when a Ractor terminates.
#
# r = Ractor.new { sleep(500) }
# r.close_outgoing
# r.take # Ractor::ClosedError
#
# ClosedError is a descendant of StopIteration, so the closing of the ractor
# will break the loops without propagating the error:
#
# r = Ractor.new do
# loop do
# msg = receive # raises ClosedError and loop traps it
# puts "Received: #{msg}"
# end
# puts "loop exited"
# end
#
# 3.times{|i| r << i}
# r.close_incoming
# r.take
# puts "Continue successfully"
#
# This will print:
#
# Received: 0
# Received: 1
# Received: 2
# loop exited
# Continue successfully
#
class ClosedError < StopIteration
end
class Error < RuntimeError
end
class IsolationError < Ractor::Error
end
# <!-- rdoc-file=ractor.c -->
# Raised on an attempt to access an object which was moved in Ractor#send or
# Ractor.yield.
#
# r = Ractor.new { sleep }
#
# ary = [1, 2, 3]
# r.send(ary, move: true)
# ary.inspect
# # Ractor::MovedError (can not send any methods to a moved object)
#
class MovedError < Ractor::Error
end
# <!-- rdoc-file=ractor.c -->
# A special object which replaces any value that was moved to another ractor in
# Ractor#send or Ractor.yield. Any attempt to access the object results in
# Ractor::MovedError.
#
# r = Ractor.new { receive }
#
# ary = [1, 2, 3]
# r.send(ary, move: true)
# p Ractor::MovedObject === ary
# # => true
# ary.inspect
# # Ractor::MovedError (can not send any methods to a moved object)
#
class MovedObject < BasicObject
public
# <!--
# rdoc-file=ractor.c
# - !(*args)
# -->
#
def !: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - !=(*args)
# -->
#
def !=: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - ==(*args)
# -->
#
def ==: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - __id__(*args)
# -->
#
def __id__: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - __send__(*args)
# -->
#
def __send__: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - equal?(*args)
# -->
#
def equal?: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - instance_eval(*args)
# -->
#
def instance_eval: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - instance_exec(*args)
# -->
#
def instance_exec: (*untyped) -> untyped
# <!--
# rdoc-file=ractor.c
# - method_missing(*args)
# -->
#
def method_missing: (*untyped) -> untyped
end
# <!-- rdoc-file=ractor.c -->
# Raised on attempt to Ractor#take if there was an uncaught exception in the
# Ractor. Its `cause` will contain the original exception, and `ractor` is the
# original ractor it was raised in.
#
# r = Ractor.new { raise "Something weird happened" }
#
# begin
# r.take
# rescue => e
# p e # => #<Ractor::RemoteError: thrown by remote Ractor.>
# p e.ractor == r # => true
# p e.cause # => #<RuntimeError: Something weird happened>
# end
#
class RemoteError < Ractor::Error
public
def ractor: () -> Ractor
end
class UnsafeError < Ractor::Error
end
end